欢迎登陆真网站,您的到来是我们的荣幸。 登陆 注册 忘记密码? ☆设为首页 △加入收藏
欢迎加入真幸福QQ群
电脑知识: 基础知识 网络技术 操作系统 办公软件 电脑维修 电脑安全 windows7 windows8 windows10 服务器教程 平板电脑 视频播放教程 网络应用 互联网 工具软件 浏览器教程 QQ技巧 输入法教程 影视制作 YY教程 wps教程 word教程 Excel教程 PowerPoint
云南西双版纳特产小花糯玉米真空包装


NSIS Error:Error writing temporary file. Make sure
提示“installer integrity check has failed”的解决办法
笔记本存在杂音怎么办
笔记本休眠后指示灯还亮是怎么回事
页面脚本错误快速解决方案
笔记本检修顺序是什么?
U盘出故障已停用如何再继续使用?
U盘量产的前期工作
U盘无法识别的解决方法
Mac阿里旺旺弹不出来怎么办
Windows的TCP协议参数
【 来源:网络 】【 点击:1 】 【 发布时间:2017_03_03 08:59:59 】

   注册表编辑器:regedit

  表项:HKEY_LOCAL_MACHINESYSTEMCurentControlSetServicesTcpipParameters

  窗口扩大因子 & 时间戳选项

  Tcp1323Opts REG_DWORD 0x00000001 (1)

  Tcp1323Opts的取值如下:

  0 - disable RFC 1323 options.禁用窗口扩大因子和时间戳选项,是默认值。

  1 - window scaling enabled only.只启用窗口扩大因子选项。

  2 - timestamp enabled only.只启用时间戳选项。

  3 - both options enabled.同时启用窗口扩大因子和时间戳选项。

  SACK选项

  SackOpts REG_DWORD 0x00000001 (1)

  SackOpts取值范围为0 | 1,默认值为1.

  描述:

  Enables and disables the Selective Acknowledgement (SACK) feature of Windows Server 2003 TCP/IP.

  SACK is specified in RFC 2018.

  TcpMaxDupAcks

  TcpMaxDupAcks REG_DWORD 0x00000002 (2)

  TcpMaxDupAcks的取值范围为1-3,默认为2.而Linux的默认值为3.

  描述:

  Specifies how many duplicate ACks (ACKs for the same sequence numbers) constitute a signal to

  retransmit a segment.

  When data arrives with a sequence number that is greater than expected, the receiver assumes that data

  with the expected number was dropped, and it immediately sends an ACK with the ACK number set to the

  expected sequence number. The receiver sends ACKs set to the same missing number each time it receives

  a TCP segment that has a sequence number greater than expected.

  The sender recognizes the duplicate ACKs and sends the missing segment.

  拥塞控制算法

  微软最新的TCP拥塞控制算法为Compound TCP (CTCP),windows 7默认不启用。

  (1)windows Vista/2008/7

  CTCP is enabled by default in computers running beta versions of Windows Server 2008 and disabled

  by default in computers running Windows Vista and 7.

  CTCP can be enabled with the command:

  > netsh interface tcp set global congestionprovider=ctcp

  or disabled with the command:

  > netsh interface tcp set global congestionprovider=none

  To display the current setting for CTCP use:

  > netsh interface tcp show global

  Parameter "Add-On Congestion Control Provider" will either have a value of "none" if CTCP is disabled

  or "ctcp" if it is enabled.

  (2)Windows 8

  CTCP is now enabled using PowerShell as netsh is deprecated:

  > set-nettcpsetting -Settingname Custom -CongestionProvider CTCP

  (3)Windows 2003 & XP x64

  A hotfix is available that adds CTCP support to 64 bit Windows XP and Windows Server 2003.

  The following registry key can be set to 1 to enable, or 0 to disable:

  > HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParametersTCPCongestionControl

  最大接收窗口

  TcpWindowSize REG_DWORD number of bytes

  取值范围:0-0x3FFFFFFF.

  描述:

  In practice the TCP/IP stack will round the number set to the nearest multiple of maximum segment size

  (MSS)。 Values greater than 64KB can be achieved only when connecting to other systems that support

  RFC 1323 Window Scaling.

  初始值

  the smaller of the following values:

  0xFFFF (65536)

  GlobalMaxTcpWindowSize

  The larger of four times the MSS (5840)

  16384 rounded up to an even multiple of the MSS

  The stack also tunes itself based on the media speed:

  Below 1 Mbps: 8KB

  1 Mbps - 100 Mbps: 17KB

  Greater than 10 Mbps: 64KB

  This parameter determines the maximum TCP receive window size offered.

  全局最大接收缓存

  GlobalMaxTcpWindowSize REG_DWORD number of bytes

  取值范围:0-0x3FFFFFFF.

  Default: This parameter does not exist by default.

  描述:

  Determines the largest TCP receive window that the system offers.

  The TcpWindowSize parameter can be used to set the receive window on a per-interface basis.

  This parameter can be used to set a global limit for the TCP window size on a system-wide basis.

本网站由川南居提供技术支持,fkzxf版权所有 浙ICP备12031891号
淳安分站 淳安分站